|
Water level control Fountain water level control |
|
|
| The controls The level sensor The electric valve |
|
The set consists of control panel (230v ac supply required) water level sensor and valve The sensor has 10 metres of cable, valves are available in 1/2, 1 or 1 1/2 inch bsp sizes and are 24v dc operated. When enquiring Please state size of inlet valve required. Basic operation: The sensor detects the water level. When the water level drops below a pre determined level (2cm) an electric valve will open allowing water to replenish the pool. The valve will close again when the maximum height is reached. Unlike most other devices the water level controls have a slight delay allowing for water fluctuation when filling or fountain operating. Dimensions can be seen on our page here The actual level is determined by how high the level sensor is mounted. Not included: Any other cables, pipe work or pool cable inlet glands, or pool water inlet. Cable inlet glands can be found on our page here
|
|
Above you can see a level sensor and a refill inlet |
