| Laminar, Technical information
|
| Each laminar Jet requires a source of display water flow. This can be a separate pump for each jet, such as the EFN 350 pump. The laminar Jets have an internal screen structure to remove turbulence from the water, so it is advisable to include an in-line cartridge or bag filter. The screen mesh is 0.8mm (1/32"), so a 600 micron bag filter would be adequate, sized for the flow of all nozzles. |
|
|
| Flow |
26GPM (100 LPM) |
| Pressure |
12'TDH (0.4 Bar) |
| Connection |
1" FNPT |
| Orifice Diameter |
0.7" (18mm) |
| Recommended Pump |
EFN 350 |
| Internal screen mesh |
0.8mm |
| Recommended filter |
600 micron bag type |
| Internal light |
12 volt / 75 watt |
| Outer drive |
24 volt 2 amp dc stepper motor |
| Minimum reaction time |
0.3 seconds |
| Maximum water depth |
15.75" (400mm) |
| Material |
Stainless steel |
| Vertical adjustment |
45 - 90 degrees |
| Horizontal adjustment |
5 degrees |
| Maximum display height |
16' 3" (5m) |
| Maximum display throw |
20' 0" (6m) |
| Weight |
155lbs. (70Kg) |
| Motor cable |
7x18ga. 0.315" O.D. (8mm) |
| Light cable |
2x14ga. 0.35" O.D. (9mm) |
|
|
