Installing  water level controls

The water level control unit should be mounted  in the fountain's dry pump chamber or control room (or a suitable dry location)

The water level sensor should be fixed to the pool wall, the height determines the level at which the water inlet valve will operate.

The sensor comes with 10m of cable and should exit the pool via a suitable gland. The cable is then connected to the level control panel.

The control panel requires a 230v ac supply with means of local isolation, a switched  fused connection unit fitted  with 5A fuse fitted is suitable)

A cable (not supplied) should be connected from the control panel to the water inlet valve. The water inlet valve is 24 v

Water and mains should then be switched on and the controls adjusted accordingly.